Non-Explosion Proof Sirene
TOA
Features:
- Wide Angle Sound dispersion Pattern\Non-Explosion proof Siren
- Built-in 24 Watt driver
- Polarity protected (dc unitFiberglass Housing)
- Fiberglass Housing
Spesifications :
- Power : 24 Watts
- Frequency : 250 – 2500 hz
- Voltage : 12-24 Vdc
- Sound Level Output : 110 dB on axis at 10 feet
- Dispersion : 120o X 60o
- Impedance : 10 Ohm
- Dimensions : 17”W x 8”H x 19.5”L
- Conduit Connection : 0.5” rigid pipe conduit
- Weight : 10 lbs
- Conduit cycle : Continuous
Non-Explosion Proof Strobe LIGHT Spesification
- Lamp Type : 700-R1-COLOR Xenon trobe Lamp Assembly ( specify color )
- Voltage and Amperage : 12-24 VDC Draws 1.25 A avg.@ 12 VDC tapering to
- Power Supply Output : 13 Watts Standart, 11 Watts for 3150
- Temperature Range : -40 0c to +55 0C
- Flash Rate : 85 Flashes per Minute
- Temperature Code : T6-Class I Groups C & D T4A-Class II Groups E, F, & G
- Intensity : CLEAR 200 Candela elf
- AMBER 170 Candela elf
- BLUE 90 Candela elf
- RED 40 Candela elf
- GREEN 70 Candela elf
- Size and Weight : 14.5” Tall X 8-3/4” Dia. 13 lbs
- (368 mm) (222 mm) (5.9 kg)
BW Gas Alert Extreme H2S (Single Gas) Detector Spesifications
BW Microclip Multigas detector
- Case : Rugged, IP66/67 highly water-resistant design Dimensions : 1.1” X 2.0” X 3.75” (28 mm X 50 mm X 95 mm)
- Weight : 82 Grams (2.9 oz)
- Sensor Type : H2S : Single plug-in microchemical cell
- Measuring Range : H2S : 0 to 100 ppm (1 ppm increment)
- Power source (run time) : Rechargeable Lithium-polymer Battery (8-16 hours)
- Temperature Range : -4oF to 136oF (-20oC to 58oC)
- Humidity Range : 0 to 95% RH (non – Condensing)
- Approvals : Intrinsic Safety Certification in progress.
- Class I, Division 1, Group A, B, C, D IECEX: Ex ia IIC
BW Gas Alert Microclip Multigas Detector Specifications
- Case : Rugged, composite material w/ integral concussion-proof boot.
- Dimensions : 4.2” X 2.4” X 1.1” (107 mm X 60 mm X 27 mm)
- Weight : 160 Grams (5.6 oz)
- Sensor Type : H2S, CO, O2 : Single plug-in microchemical cell
- LEL : Plug-in catalytic bed
- Measuring Range : H2S : 0 to 100 ppm (1 ppm increment)
- CO : 0 to 500 ppm (1 ppm increment)
- LEL : 0 to 100% (1% increment)
- O2 : 0 to 30.0% volume (0.1% vol increment)
- Power source (run time) : Rechargeable Lithium-polymer Battery (8-14 hours)
- Temperature Range : -4oF to 136oF (-20oC to 58oC)
- Humidity Range : 0 to 95% RH (non – Condensing)
- Approvals : Intrinsic Safety Certification in progress.
- Class I, Division 1, Group A, B, C, D IECEX: Ex ia IIC
Plunger Operated Hand-Held Tube Detector Specification (GASTEC)
- Pump Stroke: Piston sampling pump, 100 ml/stroke; 50 ml/half-stroke
- Pump body : Chromed Stainless steel, The built-in tip breaker incorporates a diamond edge that cut the surface of the detector tube.
5 Minutes SKA-PAK Workline Unit Specification
> Cylinder and Valve Assembly
- Construction : Aluminum alloy
- Diameter : 4.4 inches (111.8 mm )
- Length : 12.4 inches ( 315 mm )
- Water Capasity : 80 Cu.in ( 1.3 liters )
- Air Capasity : 7 Cu.ft ( 198.2 liters ) at 2216 psig
- Rated duration : 5 minutes at 2216 psig ( 152.8 Mpa ) 20o F (- 7 o C)
> Regulator
- E-Z Flo
- Facepiece Mounted
- Small Diameter
- Maintains a positive pressure at high work rates
> Facepieces
- Scott O-Vista type. Compact, lightweight full face piece that offers a cone-shaped lens for broad visibility and secured fit. Silicone nosecup and anti-fog coating.
> Harnesses
Polypropylene webbing with corrosion resistant buckles
> Airline Connection
- Easy entry/egress capability
- Preserves Self Contained air supply
- Used with up to 300 feet of airline Operates from 60 – 125 psig
- Rectus fittings
> Weight : 8.4 lbs ( 3.9 Kg )
> Box Dimension : 370 X 345 X 220 mm ( L X H X W ), Construction : Stainless steel
3-Stage Breathing Air Compressor Specification
( Komba Electric MCH 16/ET )
- Capacity : 260 ltr/minutes, 16 M3/hour ( +/- 9.2 Scfm )
- Max. working pressure : 225 bar ( 3200 Psi )
- Cylinder diameter : 95/38/14 mm
- Speed of rotation : 1550 r.p.m
- Piston stroke : 40 mm
- Intermediate pressure : 1st stage 5 bar/70 psig, 2nd stage 40 bar/570 psig, 3rd stage 225 bar/3200 psig.
- Power motor : 380 volt; 3 phase Electric Motor 5.5KW – 7.5 Hp
- Dimension : 890 X 600 X 840 mm ( L X W X H )
- Weight : 151 Kgs
- Level of acoustic pressure : dB (A) 81 (at the operator’s work place)
- Level of acoustic power : dB(A) 94.5